Showing posts with label Tips. Show all posts
Showing posts with label Tips. Show all posts

Wednesday, February 16, 2022

ENGINE POWER UP

ENGINE

It is your choice on how powerful the engine will be. You will need also to save a budget for this work because engine power up will cost a little. If you will be short on budget you can do the following.

 Most people would agree that there's no replacement for displacement, but if you want to add some hp without bumping up the cc, you can try to make your engine breathe a little better by giving your cylinder head assembly a complete head work, like port and polish, shave the head for a higher compression rate, replace or regrind the cam to a more aggressive profile and stiffer valve springs (if available). 


A bigger carburetor and free flowing exhaust system will compliment the make-over. But if you're looking at just bolt on power adders, there's really not much other than bigger carburetor  and ditching the restrictive stock muffler for an open after market pipe. 
And maybe an ignition upgrade too.

But if you have a good budget you can choose the bore up. You can search or ask someone with knowledge about engines. You should be careful on choosing the mechanic that will work for your engine upgrade.

Tuesday, February 5, 2019

Guide for Carburetor Tuning


I read some guidelines and tips on how to tune your carburetor to its best settings. I hope that I can also help you by sharing this knowledge.


There are to screws to be adjusted, the Idle speed screw and the Idle mixture screw. For Idle mixture screw settings, 11/4 turns from slightly seated to make it in stock settings and for Idle speed screw just turn 1/2 clockwise from its engagement point. The start your motorcycle and let it heat up its operating temperature.

Idle speed screw is made for adjusting the RPM and to increase the rpm just turn it clockwise and counter-clockwise to decrease the RPM. The range should be from 950 RPM to 1050 RPM.

In terms of the Idle mixture screw it is for the adjustment of your engine running performance. By turning the screw clockwise it will make the engine to run poor and counter-clockwise to make the engine stumble. Set first the screw to make the engine runs poorly and set it again to make the engine stumble. Take note of the position of both screw for poor run and stumble. The set the screw halfway just between the two position you just have noted. If you encounter inconsistent in your idle, the manifold may be leaking or damage.

After achieving a strong idle test your motorcycle by riding it and maintain the speed of 40 - 50 mph. In this way you can check if the condition of fuel and air mixture. The sneezing sound in the air cleaner indicates lean condition of mixture and rich condition of mixture if the engine stumble or vibrates.

In terms of RPM operation, the intermediate jets is the one responsible for it. Changing the intermediate jets from different sizes may gives you the best performance and right fuel supply for your engine. Always remember to adjust the Idle speed and Idle mixture screw after changing intermediate jets.

In case of testing the main jet performance you run your motorcycle from 50 - 70 mph. If your engine backfires adjust the size of the main jet to bigger one and if the engine does not accelerate decrease the main jet size.


Changing this jet to a larger size will delay the signal to the main jet, therefore aiding with high speed tuning. This also aids with tuning an engine that is fitted with an exhaust system that is not intended for high performance. Remember that using open pipes or performance pipes may affect the performance to be obtain from carburetor. The stock size for the main jet is 40 and if you want to change it normally the range will be from 50 - 60.

Saturday, February 2, 2019

Cornering Styles

Many motorcycle riders agree that Cornering is the essence of driving. Cornering skills may be enhance by practice but you would never attain perfection but with the exception of Valentino Rossi. These are some of the questions that you may ask.
What are the reasons and kinds of mistakes often made in corners? 
What can you do about it?
What are the tips you should learn? 
Reading about cornering is not enough, you still have to practise and practise to perform it.

In cornering, everything is important. From how you look through the corner in advance, how you brake in advance, how you start the corner, how you plan your line, how you sit on the motorcycle, how you start the corner, how you use the throttle and how you shift.


Learn to judge corners for you to be able to enter an unknown corner. The right speed and the right gear is also important when cornering. Trees and lamp posts can help you to judge a corner. There are also some signs that can help you judge the incoming corner and give you additional information on how you would enter it. Be better by experience and never force to fasten that learning process.

When you are in the track, always remember that you will have to be in the outside of the line. Choose the line were you are comfortable when you start to lean in. Your vision is key factor when entering a corner. Remember that before you enter a corner you should be at the right speed, right gear with the throttle slightly turned on and as much as possible lean in at the outside of the corner.

Not all corners can be always judge by the way you look at it. There are corners that starts easy the gets tighter. This is called as Vanishing point. There are warning signs so you will not be surprised but that is not always the case. Reducing your speed may help you to pass this corner.

Friday, February 1, 2019

Carburetor Care

Did you experience that while you are travelling and suddenly your motorcycle choke up like  your running out of fuel? Sometimes it will come that you will experience this activity. There are two reasons on why it happens. First is that you really run out of fuel or second is that your carburetor malfunctions. As you notice, the carburetor is just a small part of the motorcycle but one of the most important system in your motorcycle. Commonly this part is the one with highest number of malfunctions that can happen. Experiencing poor performance in road is one of the problems cause by carburetor malfunctions.

Common reason of carburetor malfunction is when your carburetor is dirty or when the passages of air and fuel are clogged. This are the main factors that really affects the performance of your carburetor. It is normal that your carburetor becomes dirty but it is abnormal that you will not maintain your carburetor condition. In a motorcycle it is not only the engine that is to be maintain but also your fuel system. Common problems that happens are because of carburetor malfunction. That is why it is recommended that you also set time for the carburetor cleaning, tuning and checking.

Check for all possible problems like worn out parts or damaged parts to prevent the problem from going serious. Carburetor have lots of parts to be check but not all are easy to be damaged. Common parts that are easy to be damage are the jets, float bowl or valve, piston assembly, choke or enrichener system and fuel and air passage. You can replace them if you notice any abnormal condition on this parts. It is better that you spend some money for the benefits that you won'n be bother by any of this problem someday.

Preserve the fuel system like you preserve your motorcycle engine. It is the heart of your motorcycle. Just always remember that you should always maintain good condition and performance on your carburetor. Clean, clear and correct all malfunctioning parts.

Hard Starting Engine

I know that you experience sometimes that it is so hard to start your engine specially when in cold morning. There are times that this condition is normal in a motorcycle engine but there are also some problems that may cause this malfunction. If you encounter hard starting in your engine, there are some things that will come in your mind that may cause this problem like poor electricity, starter motor failure or your carburetor malfunction. Commonly carburetor is the most cause of this problem, for some reason your engine wont start easily if the carburetor malfunctions. This are some of the reason or problems that happens in your carburetor.

First thing that you will try is to choke your carburetor for more fuel and air supply. Low supply of fuel is one of the reason causing your engine not to start. Sometimes your carburetor float bowl doesn't have fuel or it may overflow that is why the supply of fuel in the main chamber is not enough to power up your engine. Malfunction in your choke is also a reason when it is plugged or not proper functioning. The inlet system leaks air and doesn't complete the right amount of fuel and air mixture produce by the carburetor. Or your jets passage are clogged and can't supply fuel. The tuning of the carburetor also affects the performance when it comes in starting.

This are some tips you can perform to make your carburetor work properly. The adjustment of the tuning in the carburetor is needed so that it can supply the right amount of fuel in the engine to make it start. You can work on it if you have knowledge in tuning or ask someone that is expert with it like mechanics. Check for clogged passages of fuel and air to make sure that supply of air and fuel is enough and make sure to clean the passages or replace them if needed. Make sure that the drain plug is close to prevent the fuel in float bowl from running out. Make sure to heat up your engine before riding your motorcycle for better performance.

Thursday, January 31, 2019

Carburetor Poor Acceleration Performance

You accelerates so slow and sometimes no power in your engine? Or you are not contented in the acceleration performance of your motorcycle. Check for the carburetor for this may cause this problem. It may be repaired with some simple tips and ways. 

The main problem in this case is that the fuel and air mixture supplied in the engine is not enough that results in low combustion performance. Commonly the reasons vary from adjustments, fuel type and dirty or clogged passages. Low fuel distribution will result low combustion power. Worn or damaged jets that minimize the supply of fuel may result poor acceleration performance. Some malfunction in other systems may caused also this problem. Dirty carburetor or even dirty fuel may result this problem. Clogged or plugged passages and bowl vent may overflow. Or there maybe an air leak in your inlet system that causes improper mixture of fuel and air.

This problem requires a lot of time and need a lot of work too.Mostly adjustment must take place and some test must be run to ensure if the acceleration performance is in the right level. Experts in carburetor tuning and fuel and air mixture adjustments are required to make sure that the carburetor is tuned in the best way that it can produce the perfect mixture for your engine. From combination of fuel and air to the combination of jets is necessary. Clean also for plugged and clogged passages and make sure that you are using a clean fuel type. You or a mechanic can correct and adjust all system more power efficient output for your engine. Repair and replaced all damaged or worn out parts for optimal performance.

Carburetor Poor Fuel Economy

Do you consume a lot of fuel in your motorcycle tank? Or the fuel consumption of your motorcycle just increased that much. Maybe you may have some problems in the carburetor or fuel system. This are some cases that can cause your poor fuel economy.

First to check is the adjustment of all your jets, needles and screw if they are adjusted in the right way. Engine may consume a lot of fuel if your idle adjustment is very high. Air jets and needle jet should also be checked if there are worn out or damaged parts or any clogged passages. Even the piston vacuum also may cause this problem if malfunctioned, or the whole piston assembly malfunction. Any leak in your carburetor will waste a lot of fuel, remember to check for any leaks in the carburetor, check if the drain plugged is close tightly. Also check for the hose if there are damaged or worn parts. The riding style may also cause high fuel consumption. Unnecessary revs in your engine and high speed riding is not good for your fuel economy.

To fix this problems I recommend you to clean the carburetor. For the adjustment of the screws, fuel levels and jets, if you don't have any knowledge about this you can bring this carburetor to mechanics that is expert in adjustment and troubleshooting. You should replace all worn and damaged parts if there are required to be replace. I don't recommend to repair the damaged parts but there is available repair kit that mechanics use to repair the carburetor system. Be gentle in riding on your motorcycle to improve the fuel economy and avoid unnecessary revs.

Wednesday, January 30, 2019

Overflow in Carburetor

Sometimes you will encounter fuel that spills out from your carburetor. You will notice that there is fuel flowing from the drain hose even the drain plug is close. Then you are encountering an overflow in your carburetor. How does an overflow happens in your carburetor? There are lot of reason that may cause this problems. I will tell you some of the reasons and how to fix it.

First is to check for your float bowl. There are are some cases that when the float bowl is damaged, worn or have problems may cause overflowing. Loose screws in the float bowl may also result in overflow in your carburetor. The float bowl maintains the fuel level in the carburetor and if damaged will cause some problems in your carburetor. The float assembly will leak if there are problems in the system like damage O-ring or even if the inlet valves are worn and dirty.

This is very easy to fix but be sure that you have the knowledge on how you can disassemble and assemble your carburetor. You will just need to open your carburetor and clean all the passages and other parts of the carburetor to make sure that there are no clogged passage. Check for damage or worn parts and you should replaced them immediately. Check also the condition of installment like screws and hose. Adjust all necessary parts to correct all the levels you need for the carburetor to work properly.

This are some tips that can help you if you encounter an overflow in your carburetor system. Have time to read and hope that it may help you someday.

Tuesday, January 29, 2019

Chrome Plating

When you have chrome accessories on your scooter it is very nice to see how they glitter under the sun. Normally lot of scooter and other motorcycle owner pick the chrome accessories for some reasons. Chrome is easy to clean and add a special look on your scooter. Chrome really adds a benefit or advantage to your scooter. People tend to stare on your scooter when it has chrome accessories. The shine and beautiful look of your scooter with chrome is really a big deal. The best way to flatter a rider is to compliment how its motorcycle look.

Chrome plating is also a choice for you if you really love chrome in your scooter. Normal parts to be plated by chrome are the scooter wheels. This is the first part to come in your mind when you heard about chrome plating. Chrome plated wheels have lot of advantages specially when it come in cleaning. IT is easy to clean chrome plated parts and really saves a lot of time and energy. Do no more scrubbing and other cleaning techniques. 

The best benefits of chrome plating is that it adds a lifespan in your scooter parts. Chrome is a metal that is plated to your scooter parts and serve as a shield or protector. It prevents corrosion from different parts and make it less prone to wear even with long use. But there are also some disadvantages when using a chrome plated parts on your scooter. This are some disadvantages that I read about chrome plating.

Other riders that chrome is not good for your scooter specially when driving in daylight. The shine of your chrome parts from the direct sunlight can reflect to other motorist that you meet in the road. This reflect can make other motorist dazzle from the chrome glitters. Also chrome plated parts gets hot when direct sunlight hit it. This is why you will need to wear protective gear to prevent you from getting burned.

Monday, January 28, 2019

The Backfire

What is a backfire?

Backfire is the combustion or ignition produced by running engine that happens in the exhaust system rather than inside the engine. It can produce loud sounds or flames in the end of the pipe when the unburned fuel is ignited outside the combustion chamber.


What are the reasons why engine backfire?

There are several reasons why this backfire occurs on your scooter engine. This reasons differ on what causes this backfire like when shutting the engine, carburetor tuning, fuel components or even when the installation of the muffler is inappropriate.

The most typically reason why engine backfire is when the engine is rapidly decelerated. This deceleration in the engine can cause backfire in the way that the remaining fuel in the exhaust system is ignited by the hot muffler. This also occurs when you shut your engine while at high RPM. Your fuel components may include a higher blend of alcohol that is very fast to ignite causing your fuel to be ignited even if it just touches a hot surface. Carburetor tuning is inappropriate that causes the fuel and air mixture to overflow the chamber resulting backfire in the muffler. The muffler installation may also cause this problem in your engine when the muffler is not mounted properly. The last reason is the engine timing. Example is when the spark plug fires at the wrong time, resulting to ignite the fuel and air mixture while the exhaust valve is not yet close.

To resolve this problems, you may work on some tips and guidelines that can help you fix your scooter engine backfire. You can practice to idle your engine down at the proper speed to allow your engine to cool some before shutting the engine. Fix the tuning of the carburetor and make sure that the right tune is acquired. You can ask for experts to tune your carburetor in its best. Fix the timing of your engine from valves to spark plug to make sure that all process are done in the same time. You can also change your fuel choice to non-alcohol fuel to lessen the possibility of backfire in the engine. Check the muffler if its mounted in the way that it fits the exhaust port and do not let any air to pass through.

Engine backfire is not bad and will not harm your scooter engine but still should be fix for efficient, convenient and relaxing travel along the way. It is not good to hear your engine backfire while driving. The best way is to set your engine at its very best to ensure best performance for your scooter.

Sunday, January 27, 2019

Electrical Problems

This is a common problem on some scooters and motorcycles. Your electrical wirings as you can see is prone to rain and dust. There are issues that can affect you scooter if encountered problem with your electrical connections. Failure to use your lights like signal light, headlight and tail light even halting your engine. Your scooter electrical wirings is like the nerves of a human being, all of the command you want to your scooter will be pass on by this system. That is why it is important to maintain good condition and connection on your wiring system.

The first thing to remember is ask yourself. Do you have knowledge on this wiring system if your are planning to make some changes on your wirings. Whenever you have to make changes or cut some wire or even add some connections, remember and make sure that you are doing it right. Wrong connections in your wiring can cause your bike to be on fire. When working on a wiring system in your scooter make sure to check all the ends of the wire that they are properly taped after being cut. Short circuits may happen if you ignore loose wires or damaged wires.

Also to be consider is the battery condition. There are two types of battery used in scooters, the maintenance battery and the maintenance free battery. Check your battery regularly from damaged and wore bolts, also check the condition of the battery like its charge and fluid level. Check also your fuse and regulators for damages. Replaced all damaged parts of your wiring system.

To make sure that your scooter wiring system is in good condition, it is better to ask those with full knowledge about your scooter wiring system. In terms of your wiring system is totally damage, there are wiring harness available to be bought in case that you need a replacement.

High Fuel Consumption

Does your scooter consume high amount of fuel ? If it does, your scooter might have some problem causing your fuel consumption go high. There are several reasons that occurs which result this problem. I will give you some tips and checklist to make sure that your scooter has good fuel efficiency and economy.

1. Check your carburetor. There are 2 thing to be check in your scooter carburetor. First is check if your choke lever is in normal position. If the choke lever is misplaced it can cause your scooter to consume a lot of fuel. In case of early morning starting of your scooter and your engine is cold, it is necessary to use the choke to make the engine starts but be sure that to place it back after use. Second is that check your carburetor tuning. Adjust your carburetor to the very best tune to make sure that it only supply the right amount of fuel to you engine. Also please add the checking of the drain plug of your carburetor for loose threads and clean your carburetor in case that it is dirty.

2. Check your scooter tires. Make sure that your tire is in the right amount of pressure to ensure the smooth travel. Flat tire or lack of pressure can increase your fuel consumption. Causing your scooter to slow down even if you are in a high throttle place. Check your tire for punctures, pressure and traction.

3. Maintain proper riding. Don't intend to ride you scooter very hard or push it to its limit. Unnecessary accelerations or braking can increase your fuel consumption and even worst is lessen your engine life span. It is important to maintain your bike in a good condition specially when riding. Check for brake drums and pads to make sure that there is no unnecessary braking happening.

4. Maintain proper changing of oil. This is just a small factor but still need to be remembered. Changing your oil and maintaining your engine in good condition help you in getting good mileage.

5. Check your air filters. This is one common problem that may cause high fuel consumption. With normal use in your scooter you can change your air filters in every 20000-30000 km. but need to be change frequently when you ride in more dusty road or terrains.

This are common and small factors that can affect the fuel economy of your scooter. Remember and consider all this factors so that you can save more and you help your engine to increase its life span. Proper care can save a lot by avoiding wear and malfunctions. 

Flat Tire Problems

If you are a rider you already encountered a flat tire while travelling. Time consuming and hassle full specially when you are in a hurry. Now a days the use of tubeless tire is vogue, with thick tire surface it prevent punctures of small sharp objects to pass through the tire but if you encounter punctures from long sharp objects. Different industries now offer a new product that will help you to save time from having flat tires.

The use of tire sealant is now the latest way to prevent being bother by this flat tires. With this new product you will not need to find someone to seal the puncture of your tire anymore. When I first heard about this product I actually got excited to try it on my scooter tires and test how effective it is. The best thing about this tire sealant is it saves you money, time and keep your driving stable on the road. It also helps your tire efficiency and expand the tire's life. Have you imagine while driving and suddenly hit something sharp in the road and you don't even notice because it does not cause you any hassle.

Or just imagine that while you are driving at a constant speed and got a flat tire, usually the control on the motorcycle will be hard because of the vibrations and shaking of the handle. Compare it when you are driving with a tire sealant installed in you tires, it will give you the confidence and safety while driving on road. Tire sealant is not hard to apply because it is just like a water to be injected in the tire.

If you doubt about the safety of the tire sealants, I can assure you that this product is safe. This product is non-flammable and will protect your wheels and mags from corrosion and oxidation.

Friday, January 25, 2019

Exhaust Total Care

Almost all of us want to make our exhaust pipe look new as possible even if it had been used for a long time. Normally in the case of exhaust pipe in our scooter it tends to change color specially the elbow part because of heat produced by internal combustion. You can't always clean the pipe line every time after use. So what will be the best way to preserve the appearance of your exhaust pipe.

Heat management is one of the best way to use to prevent the discoloring of your exhaust pipe. This is the way where it reflects or absorb the heat to prevent the components of your pipe from heat soak. There are lot of heat management ways that can help you like heat shield, ceramic paint, thermal barrier coating or heat wrap. But for our scooters, the best way to use is the heat wrap. It is the most cheapest way and very easy to apply. It has been used for a long time to protect the exhaust from burns. This heat wrap is a high temperature synthetic fabric that can be wrap on the elbow of your pipe.

Maybe you will be asking why is this important in your scooters. Maintaining the exhaust pipe appearance is not the only reason why I recommend this to use. Heat management can also help your scooter to boost its power and efficiency. But this does not increase the power output that much. You preserve and maintain the good appearance of your exhaust pipe and in addition add more power and efficiency to your engine.

There are lot of heat wrap that is sold in the market. You can purchase it to any motorcycle parts shop and apply it by yourself by wrapping it in the pipe elbow.

Thursday, January 24, 2019

Flyball Combination



This flyball or rollers are cylinder shape like that is installed in the drive pulley. Its purpose is for the acceleration and top speed of your scoot. This flyball also comes in different weight or size. The size will depend on how you will like your scooter to run. Is it with high acceleration or with a high top speed. Combining the size of flyball will vary in different reason, from the weight of your scooter, the rider's weight, your engine power, center spring RPM and tire size. A drive pulley is installed with 6 flyballs in its slot, this will help the pulley on how it will work for the scooter. Combining their weight and size is much harder than you think. It takes lot of test and combination to perfect the size of your flyball that will suit the scooter. Let me give you some tips on how you can combine your flyball depending on your scooter and your weight.

Generally speaking heavier flyball gives you a higher top speed but considering the scooter weight that the flyball can be lighter or heavier. Usually ended up choosing from 9 grams to 13 grams flyball. Combination is a bit confusing but can be test from pulling some combinations from your own. You can also combine different size but for the maximum of 2 size only, example is you combine three 10 grams flyball and three 12 grams flyball. It is recommended if you want to balance your acceleration and top speed. But remember that heavy flyball can make your scooter loose its acceleration. Try different combinations and hope that you will find your right taste of flyballs sizes.

In terms of lighter flyball, they gives you high acceleration but bot that high in means of top speed. Best sizes for small riders and light scooters. The size will vary from 7 grams to 9 grams and will depend on your choice of combination. Try to vary the size by 1 gram each combination so you can come up with a combination that is suitable for you and your comfortability while running.

Sunday, January 20, 2019

The Power

I want to do a comparison between two types of engine. The 2 Big Valve engine compared to a 4 valve engine. I decided to write about this topic because I can see a lot of scooter owner now really power up their engine and among them, there are lots of 4 valve engine users. Why do they pick this type of engine and what is their difference with the other type of engine. Also lot of scooter owners that power up their scooter choose the big valve to replace the stock one. What are the advantages and disadvantages of this engine. Through this post I hope that you could learn more about this type of engine and may help you to choose your desired engine type.

Let start with the Big Valve engines. This engine type is almost similar with the stock one but the difference is that the valves and ports are bigger. This big valve and ports helps to provide more power by mixing fuel and air in much large amount than the stock valve. In return this engine also higher fuel consumption compared to the stock. Adding fuel consumption for the exchange of power is really good for those who travel in long distance. From this modification you can really achieve a great hp and mileage in the high ways. Larger valves increases the breathing capacity of your engine but really need a good modification. Always remember that if you would try to modify to big valve there are still other things to consider. First is the supply of the fuel and air to the engine, with a bigger valve and port the engine will need to gain the right amount of mixture. The common problem with this is the one that supply the fuel and air. Yes, the carburetor itself. When you modify your engine to a big valve, commonly your mechanic will tell you that you need a much larger supply of fuel and in that case you will need to buy a new carburetor that can supply the fuel needed. From 26mm carburetor you will change to a bigger carburetor, maybe 28mm or 30mm will do.

In case that you don't have the budget to afford a new one other modification will do, adjusting your old carburetor to supply more fuel. This can be done by enlarging the jets of the carburetor. The other one is your exhaust system. Is your exhaust system can hold the power that your engine gives? Stock pipes are not good with this type of engine because it will not allow the engine to breath enough. Change your pipe to a power pipe with much bigger elbows and exhaust tip. You can look for some power pipe on market and they come available depending on the power of your engine. Best engine type for all riders that loves to travel a lot at long distance.


In terms of using the 4 valve engine will really cost a lot. This type of engine really comes with a high price but absolutely give you the power you expect. Best engine type for those who loves great power response. The 4 valve engine has 2 intake valves and 2 exhaust valve making improvement for the the fuel and air mixture. Also 4 valve engine has much larger surface are that creates or gives more combustion potential. 4 valve engine is much powerful than the big valve but also needs a lot of supply of fuel. The 4 valve is not that expensive but the one expensive is the parts to be added to the engine. Tappets, cam breather, springs, rollers and other. Mechanic also recommend to use a radiator for the 4 valve to help for the cooling system of the engine. Really reliable for heavy long travels ride and will sure you that it will never give up till dawn. This type of engine is great in style, cost more than any type but still give the best power performance for your scooter. A good maintenance can keep your 4 valve to last for a long period of time. 

About on what you have read above, I hope it helps you to choose what is right for your taste. It will be your choice on what engine type you would choose. A Big Valve engine with the slight fuel consumption and better power performance or the 4 Valve engine for high fuel consumption and best power performance. Take a time to think for the best choice. The budget also will be one thing to be consider if you plan for an upgrade engine. There are lot of brands to be chosen. They varies in price but be sure to choose those with high quality and great durability. For me they are just the same, maybe the type of use will define the performance you will need for your scooter.





Saturday, January 19, 2019

Group Riding Tips

Planning to ride with your group? There are some tips and guidelines you should know before the day of the ride. This tips can help you and your co-riders  to have a fun and great ride. This is the group ride all about, sharing the view and joy with other members.


First is to organize your ride. Form a group to talk all about the information about your ride, destination and the distance. Ask your group or other member to meet in a parking lot or meeting place to show where is the destination and to get the contact information of each other. When you start riding be sure to drive only in the speed you are comfortable. Don't ride any faster that you can do and always think about the safety of yourself and others. When planning for the alternative stop overs, you should consider and know the stamina of each member and also the condition of their motorcycles. If it is a long ride remember to have few breaks while you are in the way.


Always keep in your mind that you don't want to be the reason of stopping by the group for some problems. Before going in a ride check all the mechanical system of your motorcycle. Keep the level of gas in your tank and all maintenance should be time in time. Problems can be prevented along the way if you know how to take good care of your motorcycle.


You will need to communicate with each other with signals. Learn the basics about the signal use and riding. Keep the riders who have experience in riding at the front to guide those first timers. The leader should adjust to the pace of the new riders and remember that the sweep should have all the communication access to all members, for the purpose of some problem happens like motorcycle malfunction or some accidents. Never to fixate on the motorcycle in front and always remember your training. If the group speed is above your comfortability zone don't be afraid to have your own pace. Arriving at destination with few minutes behind is better than riding in an uncomfortable way. Always remember that you are riding for fun.


It is better to form a small group of riders so that you can easily navigate other streets. Your formation in the road is also important, always keep distance from the motorcycle in front and at your back. Never ride at side-by-side because it will lessen your space and will make you to maneuver harder. Always let other rider to maneuver at their own will in case of emergency. When entering sharp curves, intersections or rough surface road always make a single line, this will allow you to avoid foreign objects in the road that you don't see. Follow the motorcycle in front of you as they know what is ahead of them. And the most important is to follow the rules in the road. Blocking other cars in the intersection is prohibited.

Ride Safe. Buckle Up





Friday, January 18, 2019

How 4-Stroke Engine Works

Most of us have heard about a 2-stroke and a 4-stroke engine, but do we all know how really this engine works? Every vehicle needs an engine to provide the power for the said vehicle. The combustion that happens in our engine is responsible for the power we get from the vehicle that make it run. I will explain some of the details and information about a 4-stroke engine. First I will tell you the parts of an engine and then explain how these parts accordingly with the other parts.

Engine Cylinder
This the part where the combustion of the fuel and air mixture happens. This is a space where the piston travels. Commonly engine cylinders are typically cast from cast iron or aluminum before proceeding in a machine that polish the cylinder. Most cylinders now are made of Aluminum that really helps for faster and easier break-in. In the process of break-in of the engine, a simple irregularities in the break-in period may cause a ware in the cylinder sleeve. If later on it continues to wear the cylinder sleeve, you will come up reboring. Reboring is the process were you need to increase the diameter of the cylinder and piston rings.

Engine Valves
The one that control the timing and mixture of air and fuel that flow to the engine. The one also responsible for the outflow of burned gas after combustion. There are two type of valve, the intake valve and exhaust valve. The valve have components when installing in the engine, the stem oil seal, spring and the lock that holds the valve in its place.

Spark Plug
This is the one that transfer an electric current in the main chamber that ignite the fuel and air mixture.

Crankshaft
The part that converts reciprocating motion to rotation motion. This part is the one responsible for the push and pull movement of the piston connected by connecting rod.

Engine Piston and Piston Rings
A component for reciprocating engines or compressors. The piston is the part that moves to compressed the expanded fuel and air mixture inside the cylinder. Contains of piston rings usually compression rings and oil seal ring. These ring help the piston for covering and uncovering ports in the cylinder wall.

Connecting Rod
In an engine this part is the one that connects the piston to the crankshaft. With the help of the crank they form a simple mechanism that converts reciprocating motion to rotation. Its the one that push and pull the piston inside the cylinder.


These are the parts that is responsible in the combustion process inside the cylinder. Now I will explain how a 4-stroke engine works. There are 4 cycle in the process of combustion, the intake, compression, power and exhaust.

Intake

When the piston move downwards the intake valve is open and allows the flow of fuel and air mixture inside the cylinder. With the help of a cam lifter it will push the intake valve to open and keep the exhaust valve close.

Compression

In this cycle the piston moves upward compressing the mixture and the pressure produced by the compression shuts the intake valve. The piston move upward compressing the mixture and until before it reach the top part of the cylinder...

Power

At the end of the compression stroke before the piston reach its highest peak the spark plug  ignites producing electricity that burns the compressed fuel and air mixture. The force produced by burned gas pushes the piston downward.

Exhaust

When the piston reach the bottom, the exhaust valve and the piston upwards to push out the burned gas form from combustion. Then the cycle repeats and repeats.

Sunday, January 6, 2019

Riding Skill Techniques

The best skill to know in riding a motorcycle is cornering. Cornering causes some accident is mostly motorcycle riders. Cornering can be learned by practice and training. In cornering , there are things to remember and everything is important. Your sitting position, where and when to start the corner, the proper use of brakes and gears and how you look advance to plan your line.

First to know is how you judge the terrain you are going to enter. When you see a corner you would practically observe the surroundings by looking far ahead. Observing the nature may help you to be expert as you can see the road even without looking at it. Another thing is that when you are entering a corner, are you in the right speed. Remember to observe road signs in your way to the corner for other information like how sharp is the curve and specially the speed limit.

The perfect line through a corner depends on where you ride. If you are on the track, then your goal is simply to get as fast through the corner as possible. You should choose your line such that you can ride one fluent line from the point where you lean in, and such that you are able to accelerate easily throughout the corner. Keep at the outside line when cornering as possible as you can.

There are also corner that tighten as you enter. It is not possible always to judge a nasty kind of corner, there are so me road signs to inform you but not always the case. What to do when you are surprised with a tightening corner? You can bend your knees more and try to get to the middle part and a gently grab of the rear brake will help your rear wheel turn more. But remember not to panic that you may hit the brake so hard.

What is the right speed to enter a corner? A fast or slow one? The answer is the speed you are comfortable with. There is no right speed required unless seen on road signs that authorities set. Sometimes in some emergency cases there will be the time you will need to brake. The best way for this is first to use the back brake. If you are planning to use the front break always remember to hold the clutch for manual motorcycles before applying front brakes.

By concentrating on looking, and on the line through the corner, somewhere in the future, really get that higher speed. When you enter a corner at a slower speed than might seem necessary with hindsight, it only means that you needed the slower speed, and that is no mistake at all.

Always remember to take advance precautions in the road to ensure your safety and avoid accidents. Practice this techniques that this may help you a lot in some cases. You don't need perfect it just need to know how to apply the skills on your own.

Sunday, December 30, 2018

How to Break-in your scooter


Break-in or breaking in or sometimes called mechanical running is the process of giving the scooter an initial running period with light load, normal load or heavy load. This is done to make sure that all wearing parts are fitted. This is to produce the last bit size adjustment that will give them stable relation to each other. The manufacturers give some specific driving guidelines written on the scooter manual on how to break in the scooter. The focus of engine break in is to make the piston, piston rings and cylinder wall be compatible to each other. Experts varies different suggestion on how to break in your engine, some says that it is good for a hard break in while other says it is much good with light break in. There is no set of instruction for breaking in an engine.The users manual recommends light break in at first because the scooter break in is already done in the factory. I hardly recommend a Hard Break in for your scooter for a smooth and powerful results. Just remember to vary your speed while breaking in and don't stick to your speed. And also changing the engine oil in the right time should be strictly done.

The goal of engine break in is for the piston, piston rings and cylinder wall. When the engine is powered up, the piston rings between the piston and cylinder will begin to seal and smoother. For a few years, the requirements for the break-in of engine has changed because of improved materials and design used in the engines now a day. Today Chrome Bore engine are use rather than Steel bore. It is much easier to break-in a Chrome Bore because of its smooth cylinder wall.

There are important preparations and planning which must be considered before running the engine. Break-in can take place from a running vehicle or while travelling but sometimes used the engine stand way of break in. Engine stand break-in is the process of breaking in the engine in center stand and not moving. Heating up only the engine in a period of time. Engine preparation varies also due to the factors that there are different types of engine and some conflict on expert suggestions. 

To prevent the increase of oil pressure in the engine, experts recommend to start with Revolution per minute or rpm and the run the engine for few  minutes. There are also some problems that can be encountered if your break-in is not good. Some cases of these are worn out cylinders because of improper break-in. The oil dried because of too much pressure in the engine and the owner forgets to check it. Letting the oil dry while breaking is really a bad idea that's why you should always check for the engine oil level. Sometimes other parts are also damaged when there is a failure in the engine, this consequence should be avoided because it will cost a lot replacing some damaged part.

Comparing the break-in process now from the past years you will notice that the required time significantly decreased from months to days to hours due to some reasons. One of the reason is the company upgrade facilities that is capable giving better output on engine parts and assembling. Some manufacturers also perform break-in in the factory before releasing the unit to the market. They also perform some test for the engine to ensure its performance, durability and endurance. Other reason is the growing knowledge and experiments on how they can make a more easier, faster and reliable manufacturing. Science had help manufacturers a lot when it comes for performance output and how they ca make the product more useful.